MTEN-2500 Series Technical Specifications |
Power Requirements |
UPS |
Type: Internal, rechargeable Lithium-ion battery |
Duration: Not less than 4 (6-7 hours typical) |
Recharge time: 3 hours typical |
Replacement: Field-replaceable with zero downtime |
Lifecycle: Greater than 92% retained power/load capacity after 500 charges |
Surge/Isolation: 40 Joules (RIA12 / EN50155 Compliant)/1.5KV Galvanic |
Charging |
AC |
Range: 110-220vac, 50-60hz source, adaptor included as accessory |
International: Universal plug adaptor for world-wide AC charging included as accessory |
Alternate: 400hz adaptor available |
DC |
Vehicular: Standard Vehicular adaptor included as accessory |
Alternate: Any 10-31 VDC source (optional adaptors available) |
Load: 50/100 watts typical/200 maximum while charging |
Environmental |
Max Operating Altitude: 15,000 ft max un-pressurized, unlimited pressurized altitude |
Cooling: 100% Passive |
Weather/Dust/Water resistant |
Temperature: -40 to 80c (-40 to 175f) |
Physical |
Size: 9x21x12 inches (airline carryon compliant) |
Weight: 36 lbs without accessories, 45 pounds typical with accessories |
Form Factor: Semi-rugged Aluminium roll/carry suitcase |
Configuration Ports |
Type: 3 Router ports, 2 WMIC ports (typical depot use only) |
Form Factor: DB-9 |
Global Positioning System |
Frequency: 12 channel, L1, 1575.42 MHz |
Tracking: CPC (carrier-aided) 12 satellites simultaneously |
Velocity: 500 m/s, Acceleration to 5 G |
3D Resolution: 5 meters |
LAN
Sub-net
Connectivity |
Ethernet |
Ports: 18 total, 8 dedicated Unclassified (SBU), 8 dedicated Classified (SIN), 2 SBU/SIN crossover |
Throughput: 100 Mbps (10BaseT or 100BaseTX with auto-crossover) |
Form Factor: RJ-45 |
Standards: 802.1q, 802.1d, 802.3 and 802.3U complaint |
Wireless |
Clients: 244 SBU wireless client load (practical load depends on selected/available WAN throughput) |
Access: WPA2 compliant wireless interface (legacy access adaptors available) |
Standard: 802.11b/g (802.13 upgradeable near future) |
Throughput: 1–54 Mbps shared depending on range, clients, and environmental factors |
Security |
DITSCAP Compliant/WPA2 compliant |
802.1X support with Protected Extensible Authentication Protocol (PEAP/TLS) |
Per-user, per-session, Wired Equivalent Privacy (WEP) keys |
MAC address and standard 802.11 authentication mechanisms |
Prestandard Temporal Key Integrity Protocol (TKIP) WEP enhancements |
Key hashing (per-packet keying), message integrity check (MIC) |
Broadcast/30 minute key rotation |
WAN Uplink
Connectivity |
Ethernet |
Ports: 2 ports available for agency/ satellite /commercial or other Ethernet-compatible uplink devices |
Throughput: 100 Mbps (10BaseT or 100BaseTX with auto-crossover) |
Form Factor: RJ-45 |
Wireless |
Ports: 1 port available for agency/commercial ‘hotspot’ internet uplink |
Standard: 802.11b/g |
Cellular |
Ports: 2 ports available (1 GSM; 1 CDMA) for internet uplink via host service provider |
Compatibility: Verizon, Sprint, AT&T, Cingular, T-mobile networks |
Throughput: 144K bps, 256K bps with EV-DO |
Standard: 1xRTT 2.5G(3G), TIA/EIA/IS-98C, IS-95A/B |
Protocol: Code Division Multiple Access (CDMA), Time Division Multiple Access (TDMA/GSM) available |
Smart
Serial |
Ports: 2 ports available connection to any Serial Compliant IP Modem Interface |
Throughput: 2 mbps synchronous/115 kbps asynchronous |
Form Factor: Smart Serial |
Support: HDLC, asynchronous, synchronous, octet-oriented PPP modes |
